Glass door Patch fitting is a kind of fixed on the edge of the glass door, the following small series for everyone to introduce what is the glass door Patch fitting? How to install the glass door Patch fitting? Glass door clamp installs seven steps
What is a glass door Patch fitting?
Glass door clamps, also known as the door Patch fitting core, play the role of fixed glass doors, are generally used with density board, due to the friction they receive when using larger, so the material and process requirements are higher. The glass door Patch fitting is fixed on the edge of the glass door and is used to install hardware accessories for other components. There are many brands of glass door Patch fittings on the market and on the Internet. The materials vary in material and type. However, metal is generally used as the main material.
How to install the glass door Patch fitting?
Seven Steps for Installing Glass Door Patch fittings
1, the glass door Patch fitting installation of the line, positioning the fixed glass and movable glass door into a complete glass door, and then according to the requirements of the design and construction drawings, a unified line, positioning, and determine the position of the door frame.
2. Limiting slot at the top of the installation door of the glass door. Limiting slot width The glass thickness is 2-4mm, and the limiting slot depth is 10-12mm.
3, glass door installation of metal finish wood tray installation First square wood fixed on the ground, and then use the adhesive to paste the metal veneer on the square wood.
4. Installation of vertical door frames for installation of glass doors The center line nails the door frames and square beams, and the plywood is used to determine the position of the door frame columns. Finally, the metal decorative surface is covered. Glass-Patch fitting Mounted Mounting Glass Use a glass suction cup to hold the thick glass and lift it to where it needs to be installed. The procedure is to first insert the upper part of the glass into the limit slot at the top of the door frame, and then insert the lower part of the glass into the bottom bracket mouth.
5. Fix glass nails on the glass door clamps. Two small square wooden strips are placed on the inside and outside of the bottom bracket. The thick glass is sandwiched in the middle, and then the adhesive is coated on the square strips, and the facing metal is glued on the square. On the wood. The glass door Patch fittings shall be filled with glass glue to seal the gaps such as the top limit slot, the bottom of the bottom bracket opening, the thick glass and the frame pillar, etc., and the glass glue shall be injected for sealing. If there is any excess glass glue, use a tool to scrape. go with.
6, the glass door Patch fitting installed glass butt joints Sometimes the glass door fixed parts need to be spliced, then its seam to have a width of 2-3 mm, and then the edge of the glass plate chamfered. The installation position of the glass door Patch fitting spring must be on the same axis after the ground spring and the top surface of the door frame are installed.
7. Install the lower door clamp on the glass door and install the upper and lower metal door clamps on the upper and lower ends of the glass door respectively. Fix glass door Patch fittings for glass door installation Insert small wooden sticks and inject glass glue on the gaps on both sides of the glass and door Patch fittings. Glass door installation handle installation First apply glass glue to the part where the handle is inserted into the glass, then insert the handle and wait until the root is tightly connected to the glass before fixing the screws.