In the pipe system, the elbow is the pipe fitting to change the direction of the pipe.
Points according to the Angle 45 ° and 90 ° 180 ° three most commonly used, according to the requirements of the project also includes 60 °, and other abnormal Angle bend.
The bending materials are cast iron, stainless steel, alloy steel, calcined cast iron, carbon steel, nonferrous metal and plastic, etc.
The way to connect with the pipe is: direct welding (the most common way) flange connection, hot melt connection, electric welding connection, thread connection and socket connection, etc.
According to the production process can be divided into: welding elbow, stamping elbow, pushing elbow, casting elbow, etc.
Other names: stainless steel 90 degrees elbow, right Angle, love and so on.
The stainless steel elbow is different from the carbon steel elbow, which is mainly made of materials. Its chemical composition will keep the elbow surface for a long time without rust, and will not be corroded.
According to standard production can be:
1. The manufacturing standard can be divided into national standard, electric standard, water standard, American standard, German standard, Japanese standard, Russian standard and so on.
2. The division of production methods can be divided into pushing, pressing, forging, casting and so on.
90 ° in the white steel elbow is mainly used in pipe installation, a connecting pipe fittings, used for connection pipe bend.
Connect the two tubes with the same nominal diameter and turn the pipe 90 degrees.
Stainless steel is stainless.
Corrosion resistance is the main characteristic, and chromium content is at least 10.5%, and the carbon content is not more than 1.2% steel.
If you are interested in our products or have any questions, you can directly give us a message or contact us directly, we will be in after receiving your information, will be the first time to contact you in time, we sincerely hope to cooperate with all friends, to join hands in the future, sharing success!