Call us at 0086 18038746275

News Detail

Welcome to our website!

elbow pipe pipe elbow

2018-04-02 13:32:26

elbow pipe
elbow pipe
pipe elbow
pipe elbow
 elbow pipe  pipe elbow
elbow pipe pipe elbow

The installation of sharing elbow pipe
1, The following preparations must be made before installation. All standards for stainless steel elbows must be carefully checked. The path is in compliance with the requirements of use. During the inspection, it is found that the dirt needs to be removed;
2, when the stainless steel elbow is installed, it can be directly installed on the pipeline according to the connection mode, and it is installed according to the location of the instructions above;
3, stainless steel elbow can only be installed horizontally, it should be noted that the medium flow should be up and down the vertical valve flap;
4, the stainless steel elbow should pay attention to the sealing during installation, to prevent leakage, affect the normal operation of the pipeline.
5, The gate valve and upper thread stop valve have reverse sealing device. The hand wheel is screwed to the uppermost position to tighten. This is to prevent the leakage of media from the packing.
Looking forward to your inquiry for this elbow pipe pipe elbow .

LEAVE A MESSAGE